1. Compact box design
The product adopts a miniaturized box structure, and the control components are centrally installed to reduce the overall space occupied by the equipment. For places with limited installation space such as fire pump rooms and equipment rooms, compact design can improve space utilization and facilitate equipment positioning, installation and subsequent inspection.
2. Automatic start and stop control
The controller can be connected to a pressure switch or pressure sensor according to the specific system configuration. When the fire pipe network pressure changes and reaches the set conditions, it can send a start signal to the fire pump according to the preset control logic to realize automatic start of the pump. After the system pressure is restored, corresponding operations can be performed according to the control plan.
3. Manual operation function
In addition to the automatic operation mode, the controller can be configured with manual operation functions to facilitate equipment installation, debugging, functional testing and maintenance. Staff can start and stop the fire pump according to on-site needs, allowing the equipment to have a more flexible control method under different working conditions.
4. Running status display
The controller panel can feedback the operating status of the fire pump through indicator lights, display components, etc., allowing operators to understand the current working status of the equipment more intuitively. Centralized display can improve the convenience of daily inspection and operation management.
5. Electrical protection function
Depending on the specific configuration, the controller can integrate corresponding electrical protection devices to monitor abnormal electrical conditions during the operation of the fire pump motor. When overload, overcurrent, phase loss, undervoltage, etc. occur, the relevant protection functions can respond according to the control logic to provide auxiliary guarantee for the safe operation of the pump unit.
6. Pressure signal linkage
The product can cooperate with the fire pipe network pressure detection device to control the start of the fire pump by obtaining the system pressure change signal. The pressure signal and the control program work together to help reduce manual intervention and enable the fire pump to enter the working state in time according to the actual pipe network status.
7. Electric fire pump matching
Small fire pump controllers are mainly suitable for matching with electric fire pumps and corresponding pump units, and are configured according to parameters such as motor power, starting method, and control requirements. Properly matching the controller and pump unit will help form a complete fire pump automatic control unit.
8. Centralized layout of control components
The internal electrical components adopt a centralized layout, and each functional component is configured according to the control requirements. Such a structure facilitates line inspection, parameter adjustment and troubleshooting by professionals, and is also conducive to later maintenance and replacement of electrical components.
9. Installation and maintenance are more convenient
Compared with larger traditional control equipment, the miniaturized structure can reduce installation space requirements. The internal components of the box are concentrated and the external operation interface is clear, which facilitates equipment wiring, debugging, inspection and maintenance, and can meet the installation needs of different fire pump rooms.
10. Suitable for a variety of firefighting scenarios
The products can be used in residences, commercial buildings, industrial plants, warehousing and logistics facilities, public buildings and other places that require electric fire pump control. Configure according to the flow, head, motor power and control requirements of the fire protection system to meet the automatic control needs of fire pumps in different projects.
The small fire pump controller has the main features of compact structure, automatic start and stop, pressure linkage, status display and electrical protection. It concentrates the control functions required for fire pump operation into an independent box. By being used in conjunction with pressure detection devices and electric fire pumps, more convenient automated operation management can be achieved while reducing equipment installation space requirements. For fire water supply systems that require reliable control, flexible operation and centralized management, small fire pump controllers can be used as important supporting control equipment to provide electrical control support for the normal operation of fire pumps.
WhatsApp me