Fire Pump Maintenance Introduction


The fire pump is very important. Although it is not used every day or every week, the role of the fire pump should not be underestimated once an emergency occurs. When not in use, we must carry out repairs and maintenance to ensure that it can work normally when it is needed. Because water pumps and fire protection systems are special, if they cannot be turned on when they should be used or other failures occur, it may cause unimaginable losses. Therefore, we must do a good job in the preliminary work. First, let's take a look at some problems with fire-fighting equipment:

The first thing to pay attention to is that when a fire occurs, we can notify our alarm at the first time. When there is a possibility of fire, we can judge by ourselves and then send out an alarm. With it, we can detect danger in time and eliminate it in time. Sometimes One minute earlier, the ending may be different. In this link, the self-check button enables the alarm controller to check itself. Then press the fire pump silence button, and the alarm sound will be eliminated.

In public places, some temperature-sensing instruments and instruments that can warn of smoke will be installed. When installing these, the angle must be ensured, and generally it cannot be tilted more than 40 degrees. The second is to check the contact of the base and whether the appearance is contaminated, and also check whether the installation connection is firm. If there is any damage, it should be replaced immediately.

For the maintenance of the fire pump, first check the pump body, whether it needs to process lubricating oil, etc., and whether there is rust or loss. If so, remember to replace it at any time. Secondly, check that the pump body is not leaking, even if it is only a small amount of water seepage. After that, check that the pump shaft and the motor shaft are in a central position, and the base is tight, and there are no missing parts. In addition, there are flexible rotation between the parts, and there will be no jamming when using it. You can add a little more lubricating oil regularly. For the motor, it is necessary to ensure that all parts are fastened firmly. In addition, the connection end of the lug should not be discolored, there is no exposed part, and the grounding should be good.
WhatsApp me