1. Do not install the control cabinet directly in front of the radiator of the diesel engine fire pump.
In view of the possibility of normal operation of the electrical components in the cabinet, it is recommended not to install the control cabinet directly in front of the radiator of the diesel engine fire pump. Generally, the controller installation is better at the location of the pump set or nearby, which is beneficial to the operation. Secondly, the wiring length between the control cabinet and the diesel engine is about 35m (standard).
2. The inlet and outlet pipe network should not be added to the fire pump
Considering that it may increase the weight and damage the running performance of the pump, it is recommended that the diesel engine fire pump set should be installed on the inlet and outlet pipe network. The inlet and outlet pipe network should not be added to the fire pump, and the pump inlet pipe should be kept as short and straight as possible. When the inlet is self-irrigating, in order to ensure that there is no air trapped in the pipeline, the pipeline should be installed diagonally in the direction of the pump. At the same time, the inlet pipe should be provided with a filter, and the outlet pipe should be provided with a check valve and a gate valve.
The diesel engine fire pump set can not achieve its true value when the equipment is not installed properly. As we all know, the price of a diesel engine fire pump set is not cheap, a set of installation skills, on the one hand can guarantee its value, on the other hand is the key to extending life.