How to start the fire pump? What should I pay attention to before starting the fire pump? What are the precautions before the fire pump starts? There are tricks to start the fire pump. In order to better maintain competitive fire pumps, the company hereby tells new and old customers how to maintain products during operation and better extend their life cycle.
Generally, before using the fire pump, it is necessary to check the status of the fire pump first, including the following aspects:
1. Check if the fire pump is working properly.
When testing the fire pump, the return valve should be fully open, and the valve block valve should be closed, and then restored to the normal position after the trial. In addition, when you need water or when it is an emergency, open the valve at the desired position to see if it is normal. In addition, the inlet valve of the fire pump is required to be opened, and it must be ensured that there is always one open, and the outlet valve is to be closed.
2. Check the handle of the fire pump clutch
The scientific way to use the fire pump is to check the handle of the fire pump clutch before operation, because the handle that needs to be vacuumed under normal conditions needs to be in the combined state. Therefore, be sure to check if there is a close before using the fire pump.
3. Check the release valve
Better Technology Co., Ltd. reminds each customer that before using the fire pump, it is necessary to open the deflation valve of the fire pump to reset the float assembly, ready for war, and then close the release valve.
Do the above 3 check, the fire pump start-up work will be completed. The fire pump used in the fire protection system is classified in different ways, and there are many varieties. The technical support from different production companies is also slightly different. For this reason, there are many details on the starting. The specific model fire pump is recommended to consult the relevant customer service. More complete and more specific.